All our cold water P.T.O. pressure washers now have a Galvanised frame.

PTO MODELS

Consistently popular, the P.T.O. model has been continually developed and enhanced. We now have six standard versions and two Bowser mounted models, all of which utilize the same model of pump which has three crank driven pistons with very hard wearing ceramic sleeves, stainless steel unitized valves and a brass cylinder head. The pump is directly driven from the P.T.O. drive on the tractor.

Designed with power and simplicity in mind, our P.T.O. range of power washers are constructed on a universal, robust, galvanised tubular frame which is easily mounted to the three point linkage of agricultural tractors.

Best suited to situations where the use of electrical equipment is not appropriate, the P.T.O. has the powerful cleaning force required for any task at a fraction of the cost of an engine powered washer of similar output. All models are equipped with a suction hose and filter enabling them to draw the water they require from a bowser, tank or other reservoir source. All models are supplied complete with p.t.o. shaft, 4m suction hose/filter and bypass return pipe.

We now offer Gearboxes and Hose Reel Kits which can be retro fitted to most of the P.T.O. range.

Link to one lance page
Link to two lance page
Link to Drain Jetter page
Link to Combi page